Odie's Oil

Odie's Wood Butter 9oz.

$66.96
In Stock
(25) Write a Review
SKU:
OWB9OZ
UPC:
851366006027
Shipping:
Free Shipping
Adding to cart… The item has been added



What Is Odie's Wood Butter? | Non-Toxic Wood Finish 

How to Apply Odie's Wood Butter | Food Safe Wood Finish

Odie’s Wood Butter on Redwood Lace Burl | Non-Toxic Wood Finish 

WHAT IT IS-
Odie’s Wood Butter (OWB) is a proprietary hybrid blend of hard wax oils with a high concentration of wax. A multi use finish and stabilizer that can be used alone or in conjunction with any combination of Odysseus Cornwall’s finish products. Food safe, solvent free and non toxic, containing no added driers, heavy metals or part 2 catalyst.

WHAT IT DOES-
Odie’s Wood Butter resides a little higher within the wood fiber compared to our oils, producing a softer look with less of a color change as a stand alone finish. It provides a nice quick micro build with a beautiful soft luster giving you the benefits of oils and waxes all in one. OWB protects, stabilizes, beautifies, waterproofs and enhances any surface easily, safely and naturally. When used as a topcoat, OWB micro builds quickly resulting in added depth, luster and sheen while building upon that super silky smooth look and feel. Odie’s Wood Butter is clear curing and non yellowing while containing natural UV inhibitors, helping to protect from the sun's harmful radiation.

WHAT YOU CAN USE IT ON-
Odie’s Wood Butter is great for all the same applications as Odie’s Universal Oil. All interior and exterior wood, boats, bright work, doors, floors, decks, gates, fine furniture, patio furniture, bowls, cutting boards, kitchen implements, toys, etc. The list goes on and on! Just like Odie's Universal Oil, OWB is great for wood turners and can be used as a friction polish! Use on wet and/or problematic woods to reduce checking and assist in the slow drying of wet wood. For extraordinary results, use over original Odie’s Universal Oil, Odie’s Dark Oil or Super Penetrating Oil when working with wet woods. OWB is a great finish for new wood and is suited to use over other finishes to refresh, rejuvenate and reactivate old wax.

WHY YOU NEED IT-
Odie’s Wood Butter is a fantastic stand alone finish that has the best qualities of an oil and wax all in one. It is a modified and enhanced Tung Oil based finish. Our Tung Oil has been put through proprietary processes which has then been mixed in a special blend of the finest essential oils and waxes. Born out of inspiration, hard work and a driving need to solve problems with the culmination of 40+ years of research, development and field testing performed in the most extreme environments produced a revolutionary product line that out performs and out covers the competition with unparalleled protection, versatility, beauty, durability and value, all without the use of ANY toxic chemicals, petroleum derived solvents, isocyanate hardeners, heavy metals or added driers. No worries! Odysseus Cornwall’s finishes are safe for everybody: families, kids, and pets! Odysseus Cornwall’s finishes are easy to use! No sanding or stripping in between coats or for retouching! Wipe on, Wait a while, Buff off. Easy! A LITTLE GOES A LONG WAY! USE SPARINGLY. "No solvents" means there is almost nothing to evaporate, so what you put on the wood, stays in the wood. Odysseus Cornwall’s finishes cover many, many times the area of other wood finishes. Up to 20 times the coverage as conventional finishes.

MADE IN THE USA

SPECIFICATIONS-
9 oz reusable glass jar

COVERAGE METRIC-
Approximately 60-70+ Sq. Ft per oz on typical domestic hardwoods (ie: cherry, walnut, maple, oak)
Approximately 40-50 + Sq. Ft per oz on softwoods (ie:cedar, pine, fir)
Up to 80-100+ Sq. Ft per oz on dense exotic hardwoods (ie:rosewood, purple heart, brazilian
walnut, jatoba)
Approximately 80-100 Sq. Ft per oz on metal depending on surface texture.
Approximately 80+ Sq. Ft on epoxy

TO USE-
-Calculate how much Odie’s Wood Butter you need for your project based on wood species or surface material. Remember a little goes a long way, do not over apply! Apply sparingly with a non woven pad (rated equal to or just higher than your last sanding grit) and work the Butter into the surface using circular motions. The friction from the application process helps to loosen up and drive the finish into the surface.
-Once the finish has been thoroughly worked into the surface, allow to set up for approximately 10 minutes to 3 hours, depending on the surface applied to (60-90 minutes typically being the ideal time for wood) For surfaces like leather, metal, plastic, stone, epoxy and concrete, you can buff off almost immediately after application. Do not allow the product to set for more than 8- 10 hours, this may result in a reapplication with Odie’s Universal Oil to reactivate the finish for a proper buff/wipe off.
-Now it’s time to Buff Off and remove any and all excess/residual oil from the surface until dry to touch. Take a clean terry cotton towel and scrub the surface clean, making sure to regularly flip to a clean section of towel as it gets loaded up with oil. Switch to a clean towel if/when needed. If you can swipe a clean finger across the surface without leaving a mark, you are done!
-Most surfaces can be handled almost immediately and lightly used within 24-48 hrs. Please allow 3-5 days cure time before being subjected to standing liquids.
-Additional coats of your favorite Odysseus Cornwall’s finish, Odie’s Universal Oil, Odie’s Wood Butter or Mr. Cornwall’s Super Duper Everlasting Oil can be applied using the same easy steps as above. We recommend waiting a day between coats with the exception of Odie’s Waxes, if top coating with Odie’s waxes, ideally, we recommend 3-5 days cure time.
-For non porous surfaces like epoxy resin, metal, stone and polished concrete much less oil is needed in the application process, please see coverage metrics.

TO MAINTAIN-
The only way to wear the finish away is to weather the surface away itself. If and when the time comes for some maintenance, whether it’s your floor, a countertop, tabletop or cutting board etc, simply clean the surface and apply another light coat of your desired choice of Odysseus Cornwall’s finish as per their instructions. For exterior projects, maintenance will depend on the direct exposure to the elements and the products originally used to finish the project. In extreme conditions, maintenance could be once a year to once every several years or longer in normal conditions.

  • 5
    Odies

    Posted by DANIEL HIERONYMUS on 22nd Dec 2020

    Ditto.

  • 5
    Odies

    Posted by DANIEL HIERONYMUS on 22nd Dec 2020

    Ditto.

  • 5
    Review

    Posted by Zachary Campbell on 20th Nov 2019

    Odies is a great wood finish product! It smells great so I can literally apply the finish while relaxing in the living room of my house.

  • 5
    Odies wood butter

    Posted by Rochelle Lentschke on 20th Nov 2019

    A great follow up product to Odies Oil. Love the luster it added to my project. It made this first-timer look good! Thanks for an excellent product even a newbie can use and for excellent customer service.

  • 5
    Second Stage in Finishing Process

    Posted by Alex Myla on 4th Sep 2014

    I figured out my way of using the wood butter in my finishing process of my guitars. I like to use it after saturation coats of Odies oil. I use one to two coats of this then let it dry. Sand then apply again. Sand higher then two coats of Odies Wax. The feel is amazing. Something you just cannot achieve with other oils and waxes. The great part is i feel like a kid applying this with my hands. i've written a tutorial for this process here! http://zerofret.wordpress.com/2014/07/28/my-finishing-tips-and-tricks-using-odies-oil-wax-products/