Odie's Wax 9oz.

WHAT IT IS-
Odie’s Wax (OW) is an outstanding finish made with a high concentration of super hard wax of the highest quality. Odie’s Wax is clear curing and non yellowing. Food safe, non-toxic and contains only safe ingredients including a food grade, natural, non-toxic solvent, with no added driers, heavy metals or part 2 catalyst.

WHAT IT DOES-
Odie’s Wax resides in the utmost fibers ofthe wood achieving minimal color change with added depth and luster as a stand alone finish. Use as a final coatto add extra sheen, protection and durability. Odie’s Wax protects, stabilizes, beautifies, waterproofs and enhances any surface easily, safely and naturally.

WHAT YOU CAN USE IT ON -
Odie’s Wax is greatfor all the same applications as Odie's Universal Oil: All interior and exterior wood, boats, brightwork, doors, floors, decks, gates, fine furniture, patio furniture, bowls, cutting boards, kitchen implements, toys etc. The list goes on and on! Odie's Wax is greatfor wood turners and can be used as a friction polish!

WHY YOU NEED IT-
Odie’s Wax can be used on lighter woods or any wood where only minimal color change with added depth is desired. Greatfor new wood and suited for use as a re-conditioner for old wood. OW is a proprietary blend of the finest oils and waxes, born out of inspiration, hard work and a driving need to solve problems. The culmination of 40+ years ofresearch, development and field testing performed in the most extreme environments produced a revolutionary productthat out performs and out covers the competition with unparalleled protection, versatility, beauty, durability and value, all withoutthe use of ANY toxic chemicals, petroleum derived solvents, isocyanate hardeners, heavy metals or added driers.

MADE IN THE USA

SPECIFICATIONS-
9 oz reusable glass jar

COVERAGE METRIC-
Approximately 60-70+ Sq. Ft per oz on typical domestic hardwoods (ie:cherry, walnut, maple,
oak)
Approximately 40-50 + Sq. Ft per oz on softwoods (ie:cedar, pine, fir)
Up to 80-100+ Sq. Ft per oz on dense exotic hardwoods (ie:rosewood, purpleheart, brazilian
walnut, jatoba)
Approximately 80-100 Sq. Ft per oz on metal depending on surface texture.
Approximately 80+ Sq. Ft on epoxy

TO USE-
-Calculate how much wax you need for your project based on wood species or surface material. Remember a little goes a long way, do not over apply! Apply sparingly with a non woven pad (rated equal to or just higherthan your last sanding grit) and work the wax into the surface using circular motions. The friction from the application process helps to loosen up and drive the wax into the surface.
-Once the finish has been thoroughly worked into the surface, allow it to set up for approximately 2 hours. For surfaces like leather, metal, plastic, stone, epoxy and concrete, you can buff off almost immediately after application. Do not allow the product to set for more than 8-10 hours,this may resultin a reapplication with Odie’s Universal Oil to reactivate the wax for a
proper buff/wipe off.
-Now it’s time to Buff Off and remove any and all excess/residual wax from the surface until dry to touch. Take a clean terry cotton towel and scrub the surface clean, making sure to regularly flip to a clean section of towel as it gets loaded up with oil. Switch to a clean towel if/when needed. If you can swipe a clean finger across the surface without leaving a mark, you are done!
-Most surfaces can be handled almost immediately and lightly used within 24-48 hrs. Please allow 3-5 days cure time before being subjected to standing liquids.
-For non porous surfaces like epoxy resin, metal, stone and polished concrete much less wax is needed in the application process, please see coverage metrics.

TO MAINTAIN-
The only way to wear the finish away is to wear the surface away itself. If and when the time comes for some maintenance, whether it’s your floor, a countertop, tabletop or cutting board etc, simply clean the surface and apply another light coat of your desired choice of Odysseus Cornwall’s finish as per their instructions. For exterior projects, maintenance will depend on the direct exposure to the elements and the products originally used to finish the project. In extreme conditions, maintenance could be once a year to once every several years or longer in normal conditions.